Free CRCST Cleaning, Decontamination and Disinfection practice test
HSPA gives this domain 21% of the exam. Answer each question, read why every choice is right or wrong, and see your score by topic.
- Decontamination Safety, PPE and Microbiology
- Manual and Mechanical Cleaning
- Spaulding Classification and Disinfection
CRCST Cleaning, Decontamination and Disinfection
Which tool should be used to scrub the serrations and box locks of stainless steel instruments?
CRCST Cleaning, Decontamination and Disinfection practice questions and answers
Read each question, choose your answer, then open the explanation.
1.Which tool should be used to scrub the serrations and box locks of stainless steel instruments?
- A.A soft nylon-bristle brush
- B.A stainless steel wire brush
- C.A steel wool scouring pad
- D.Any brush at all, as long as it is used under running water
Show answer
Answer: A. A soft nylon-bristle brush
WHO advises soft nylon-bristle brushes so the instrument surface is not damaged. Metal brushes and abrasive items should never be used on instruments.
Checked against WHO/PAHO, Decontamination and Reprocessing of Medical Devices for Health-care Facilities (2016)
2.Stainless steel instruments come out of the washer-disinfector with a white-gray film. What is the most likely cause?
- A.Hard water minerals such as calcium and magnesium
- B.Too little lubricant added during the final rinse
- C.Blood proteins left behind by a short pre-rinse
- D.A thermal rinse run at too low a temperature
Show answer
Answer: A. Hard water minerals such as calcium and magnesium
WHO notes that hard water leaves a white-gray residue on instruments after drying. Its calcium and magnesium also make cleaning chemicals less effective and can damage instruments over time.
Checked against WHO/PAHO, Decontamination and Reprocessing of Medical Devices for Health-care Facilities (2016)
3.Why must instruments be thoroughly cleaned before sterilization?
- A.Cleaning is needed only so the instruments look acceptable to the surgeon
- B.Sterilant works better when it mixes with leftover blood and tissue
- C.Leftover organic and inorganic soil shields microbes from the sterilant
- D.Cleaning can be skipped if the sterilizer exposure time is doubled
Show answer
Answer: C. Leftover organic and inorganic soil shields microbes from the sterilant
CDC explains that organic and inorganic material left on instruments interferes with high-level disinfection and sterilization by acting as a barrier to the sterilizing agent. Cleaning also lowers the bioburden.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
4.Why should cleaning of used instruments begin as soon as practical after use?
- A.Instruments stay under warranty only if cleaned within one hour of use
- B.Fresh blood is sterile, so early cleaning avoids contaminating the room
- C.Soil that dries or bakes on is harder to remove and can defeat sterilization
- D.Early cleaning lets the department skip inspection before packaging
Show answer
Answer: C. Soil that dries or bakes on is harder to remove and can defeat sterilization
CDC recommends cleaning devices as soon as practical after use, because soil that dries or bakes onto instruments is harder to remove and can make disinfection or sterilization less effective or even ineffective.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
5.An instrument has several removable parts. How should it be prepared for cleaning?
- A.Leave it assembled so small parts are not lost in the washer
- B.Take it apart as far as the IFU allows, keeping the parts together
- C.Remove only the parts that look visibly soiled
- D.Take it apart and send the small parts to a separate cart for reuse
Show answer
Answer: B. Take it apart as far as the IFU allows, keeping the parts together
CDC states that items with more than one removable part should be disassembled, taking care to keep all parts together so reassembly is efficient. The device IFU defines how far to disassemble.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
6.When manually cleaning an immersible instrument at the sink, where should the technician scrub it?
- A.Under a running faucet, so loosened soil is rinsed straight away
- B.Below the surface of the water, to keep aerosols from forming
- C.Above the water line, so the technician can see the soil clearly
- D.On a dry towel beside the sink, then dip it in water to rinse
Show answer
Answer: B. Below the surface of the water, to keep aerosols from forming
WHO instructs that immersible devices be fully submerged and scrubbed beneath the water line so no aerosols form, and warns against cleaning under running water.
Checked against WHO/PAHO, Decontamination and Reprocessing of Medical Devices for Health-care Facilities (2016)
7.What size brush should be used to clean the lumen of a cannulated instrument?
- A.One the same diameter as the lumen and long enough to exit the far end
- B.The smallest brush available, so it slides through without resistance
- C.A brush slightly wider than the lumen, forced in to scrub harder
- D.Any brush on hand, since the washer will finish cleaning the lumen
Show answer
Answer: A. One the same diameter as the lumen and long enough to exit the far end
WHO states that lumen brushes must be the same diameter as the instrument so all internal surfaces are reached, and long enough to exit the distal end. CDC similarly says bristles should contact surfaces.
Checked against WHO/PAHO, Decontamination and Reprocessing of Medical Devices for Health-care Facilities (2016)
8.Which statement about enzymatic cleaners is correct?
- A.They are disinfectants that make instruments safe to handle without gloves
- B.They work the same at any dilution, so measuring is not necessary
- C.They never need rinsing, because enzymes evaporate during drying
- D.They break down proteins such as blood but do not kill microorganisms
Show answer
Answer: D. They break down proteins such as blood but do not kill microorganisms
CDC states enzymatic cleaners (usually proteases) attack proteins in soil such as blood and pus, but they are not disinfectants. They must be diluted as directed and rinsed from equipment.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
9.How does an ultrasonic cleaner remove soil from instruments?
- A.Cavitation: tiny bubbles form and implode, pulling soil off surfaces
- B.High-pressure jets of water strike the instruments from rotating arms
- C.Steam under pressure loosens soil and kills microorganisms
- D.Abrasive particles in the solution scrub the instrument surfaces
Show answer
Answer: A. Cavitation: tiny bubbles form and implode, pulling soil off surfaces
Ultrasonic cleaners send sound waves through the solution, creating bubbles that become unstable and implode (cavitation), drawing debris out of box locks, serrations, hinges and lumens.
Checked against WHO/PAHO, Decontamination and Reprocessing of Medical Devices for Health-care Facilities (2016)
10.Washer-disinfectors remove soil mainly by which principle?
- A.Cavitation, using sound waves in a water bath
- B.Impingement, using pressurized water spray
- C.Oxidation, using hydrogen peroxide vapor
- D.Alkylation, using a liquid chemical sterilant
Show answer
Answer: B. Impingement, using pressurized water spray
WHO explains that washer-disinfectors work by impingement, using pressurized water to physically remove bioburden, combined with detergents and a thermal rinse.
Checked against WHO/PAHO, Decontamination and Reprocessing of Medical Devices for Health-care Facilities (2016)
11.What does it mean when a device is labeled single-use by its manufacturer?
- A.It may be reused on the same patient for up to one week
- B.It may be reprocessed once, then discarded after the second use
- C.It is intended for one patient during one procedure and then discarded
- D.It may be reused if it passes visual inspection after cleaning
Show answer
Answer: C. It is intended for one patient during one procedure and then discarded
WHO defines a single-use device as one meant to be used just once, or on one patient during one procedure, and then thrown away. FDA treats anyone who reprocesses such a device as its manufacturer.
Checked against WHO/PAHO, Decontamination and Reprocessing of Medical Devices for Health-care Facilities (2016)
12.Point-of-use treatment of instruments in the operating room accomplishes which of the following?
- A.It replaces cleaning in decontamination when the instruments look clean
- B.It disinfects the instruments, so decontamination staff can handle them without PPE
- C.It is only needed for instruments that will be high-level disinfected
- D.It starts the cleaning process but does not replace full cleaning later
Show answer
Answer: D. It starts the cleaning process but does not replace full cleaning later
WHO says point-of-use preparation is the first stage of cleaning and does not take the place of full cleaning in decontamination. It keeps soil from drying and helps protect instruments.
Checked against WHO/PAHO, Decontamination and Reprocessing of Medical Devices for Health-care Facilities (2016)
13.How often must a decontamination technician receive bloodborne pathogens training under OSHA?
- A.At initial assignment and at least once a year after that
- B.Once at hire, with no repeat unless the job title changes
- C.Every three years, along with a hepatitis B antibody test
- D.Only after an exposure incident has been reported to the employer
Show answer
Answer: A. At initial assignment and at least once a year after that
OSHA requires bloodborne pathogens training at the time of initial assignment and at least annually after that. Each annual session must take place within one year of the previous training.
Checked against OSHA, 29 CFR 1910.1030 Bloodborne Pathogens
14.Under OSHA's Bloodborne Pathogens standard, who pays for the gloves, gowns and face protection a decontamination technician needs?
- A.The employer, at no cost to the employee
- B.The employee, who is then reimbursed through payroll each quarter
- C.The employee, unless the items are reusable and last more than a year
- D.The employee and employer, who split the cost evenly under the standard
Show answer
Answer: A. The employer, at no cost to the employee
OSHA 1910.1030 requires the employer to provide appropriate PPE at no cost to the employee whenever occupational exposure exists. The employer must also make sure it is the right size, readily available and used.
Checked against OSHA, 29 CFR 1910.1030 Bloodborne Pathogens
15.When must an employer offer the hepatitis B vaccination series to a newly hired decontamination technician?
- A.Within 10 working days of initial assignment, after training, free of charge
- B.Only after the technician reports a documented needlestick or blood splash exposure at work
- C.After the 90-day probation period, with the cost shared through benefits
- D.Only if the technician requests it in writing during annual training
Show answer
Answer: A. Within 10 working days of initial assignment, after training, free of charge
Under 1910.1030(f), the employer must make the hepatitis B vaccine series available, at no cost, to employees with occupational exposure once they have had the required training and no later than 10 working days after they are first assigned.
Checked against OSHA, 29 CFR 1910.1030 Bloodborne Pathogens
16.A glass vial breaks on the decontamination counter, and the pieces have blood on them. How should the glass be picked up?
- A.By hand while wearing two pairs of exam gloves for added protection
- B.By hand, after spraying the pieces with disinfectant to make them safe
- C.With a brush and dustpan, tongs or forceps, never directly by hand
- D.With a damp paper towel folded several times to protect the fingers
Show answer
Answer: C. With a brush and dustpan, tongs or forceps, never directly by hand
OSHA 1910.1030 bars picking up possibly contaminated broken glass with the hands. It must be cleaned up by mechanical means such as a brush and dustpan, tongs or forceps.
Checked against OSHA, 29 CFR 1910.1030 Bloodborne Pathogens
17.What color must OSHA biohazard warning labels be?
- A.Bright yellow with a black trefoil like the one used for radioactive material
- B.Fluorescent orange or orange-red, with the biohazard symbol and legend
- C.Solid blue with the words 'Contaminated Material' printed in white
- D.Green with a white cross, showing the contents are safe to handle
Show answer
Answer: B. Fluorescent orange or orange-red, with the biohazard symbol and legend
OSHA requires biohazard labels that are fluorescent orange or orange-red, or predominantly so, with the biohazard symbol and legend in a contrasting color. Red bags or red containers may substitute for labels.
Checked against OSHA, 29 CFR 1910.1030 Bloodborne Pathogens
18.A surgical instrument that carries organisms from one patient to the next is an example of which mode of transmission?
- A.Indirect transmission by a vehicle (fomite)
- B.Direct contact transmission from skin to skin
- C.Droplet spread from a cough or sneeze within a few feet
- D.Vectorborne transmission by an insect such as a mosquito
Show answer
Answer: A. Indirect transmission by a vehicle (fomite)
In CDC's chain of infection, inanimate objects such as instruments are fomites, a type of vehicle in indirect transmission. Proper reprocessing removes the instrument as a vehicle.
Checked against CDC, Principles of Epidemiology, Lesson 1, Section 10: Chain of Infection
19.Apart from prions, which group has the highest natural resistance to chemical germicides?
- A.Mycobacteria such as Mycobacterium tuberculosis
- B.Lipid (enveloped) viruses such as HIV and herpes
- C.Vegetative bacteria such as Staphylococcus
- D.Bacterial spores
Show answer
Answer: D. Bacterial spores
CDC's guideline ranks bacterial spores as the most resistant to chemical germicides after prions, followed by coccidia, mycobacteria, nonlipid viruses, fungi, vegetative bacteria and lipid viruses.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
20.Where staff may be splashed in the eyes by corrosive cleaning chemicals, OSHA requires which of the following?
- A.A first-aid kit with saline packets kept in the supervisor's office
- B.A posted poison control phone number beside the chemical cabinet
- C.Eye and body drenching or flushing facilities in the immediate work area
- D.A sink with running water located somewhere in the same building, such as a restroom
Show answer
Answer: C. Eye and body drenching or flushing facilities in the immediate work area
OSHA 1910.151(c) says that where a worker's eyes or body could be exposed to harmful corrosive materials, the employer must provide eye and body flushing facilities in the work area, ready for immediate emergency use.
Checked against OSHA, 29 CFR 1910.151 Medical Services and First Aid
21.In CDC's recommended sequence for putting on PPE, which order is correct?
- A.Gown, mask or respirator, goggles or face shield, gloves
- B.Gloves, gown, mask or respirator, goggles or face shield
- C.Mask or respirator, gloves, gown, goggles or face shield
- D.Goggles or face shield, gloves, mask or respirator, gown
Show answer
Answer: A. Gown, mask or respirator, goggles or face shield, gloves
CDC's donning sequence is gown, mask or respirator, goggles or face shield, then gloves extended to cover the wrists of the gown.
Checked against CDC, Sequence for Putting On and Removing Personal Protective Equipment (CS250672-E)
22.Under OSHA's Bloodborne Pathogens standard, how often must the employer's written Exposure Control Plan be reviewed and updated?
- A.Only when OSHA inspects the facility or a complaint is filed
- B.At least every three years, or sooner after any exposure incident
- C.At least once a year, and whenever tasks change exposure
- D.Only when a new employee is assigned to decontamination
Show answer
Answer: C. At least once a year, and whenever tasks change exposure
OSHA requires the employer to review and update the Exposure Control Plan at least once a year, and also whenever new or changed tasks or procedures affect occupational exposure. A copy must also be accessible to employees.
Checked against OSHA, 29 CFR 1910.1030 Bloodborne pathogens
23.What is the difference between an antiseptic and a disinfectant?
- A.Antiseptics kill spores, while disinfectants kill only vegetative bacteria
- B.Antiseptics are used on skin and living tissue; disinfectants on objects
- C.Antiseptics are only for surfaces, while disinfectants are made for skin
- D.Antiseptics are weaker disinfectants, so the two can be interchanged
Show answer
Answer: B. Antiseptics are used on skin and living tissue; disinfectants on objects
CDC defines antiseptics as germicides applied to living tissue and skin, and disinfectants as antimicrobials applied only to inanimate objects. Disinfectants are kept off skin because they can harm skin and other tissue.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
24.Under the Spaulding classification, which item is critical?
- A.A surgical instrument that enters sterile tissue
- B.A blood pressure cuff that touches intact skin
- C.A laryngoscope blade that contacts the mucous membranes
- D.A bedpan used by a single patient on the unit
Show answer
Answer: A. A surgical instrument that enters sterile tissue
CDC defines critical items as those that enter sterile tissue or the vascular system, such as surgical instruments, cardiac and urinary catheters and implants. They must be sterile.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
25.What is the minimum level of processing for a semicritical item?
- A.Low-level disinfection
- B.High-level disinfection
- C.Cleaning with detergent and water only
- D.Intermediate-level disinfection
Show answer
Answer: B. High-level disinfection
CDC states that semicritical items, which contact mucous membranes or nonintact skin, minimally require high-level disinfection.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
26.A blood pressure cuff touches only a patient's intact skin. What processing does it need at minimum?
- A.High-level disinfection with an FDA-cleared liquid chemical sterilant
- B.Low-level disinfection with an EPA-registered hospital disinfectant
- C.Steam sterilization in a wrapped tray
- D.No processing, since intact skin blocks all organisms
Show answer
Answer: B. Low-level disinfection with an EPA-registered hospital disinfectant
CDC classifies blood pressure cuffs as noncritical items and recommends low-level disinfection with an EPA-registered hospital disinfectant, following the label's safety precautions and use directions.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
27.High-level disinfection is defined as eliminating all microorganisms except which?
- A.Mycobacteria such as M. tuberculosis
- B.Small numbers of bacterial spores
- C.Nonenveloped viruses such as poliovirus
- D.All fungi and their spores
Show answer
Answer: B. Small numbers of bacterial spores
CDC's traditional definition of high-level disinfection is killing every microorganism on or in a device apart from a small number of bacterial spores. Destroying those spores too is what makes a process sterilization.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
28.Why are 70% alcohols not used to sterilize surgical instruments?
- A.They act too slowly against vegetative bacteria such as Pseudomonas and Staphylococcus
- B.They are FDA-cleared only for use as high-level disinfectants
- C.They do not kill bacterial spores and cannot penetrate protein-rich material
- D.They are not effective against Mycobacterium tuberculosis
Show answer
Answer: C. They do not kill bacterial spores and cannot penetrate protein-rich material
CDC advises against using alcohols to sterilize medical or surgical items, chiefly because alcohol does not kill spores and cannot get through protein-rich soil. Fatal Clostridium wound infections have followed this practice.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
29.Quaternary ammonium compounds are most appropriate for which use?
- A.High-level disinfection of flexible endoscopes
- B.Sterilization of heat-sensitive critical items
- C.Inactivating bacterial spores on instruments before they are packaged
- D.Noncritical surfaces and equipment that touch intact skin
Show answer
Answer: D. Noncritical surfaces and equipment that touch intact skin
CDC describes quaternaries as routine disinfectants for noncritical environmental surfaces like floors, walls and furniture, and EPA-registered quats as suitable for equipment that touches only intact skin, such as blood pressure cuffs. They do not kill spores and usually are not tuberculocidal.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
30.How should a technician determine the contact time and temperature for a high-level disinfectant?
- A.Use 10 minutes, the standard time for all high-level disinfectants
- B.Use twice the label time to build in extra safety for every item
- C.Use the time recommended by the most experienced coworker
- D.Follow the FDA-cleared label for that specific product
Show answer
Answer: D. Follow the FDA-cleared label for that specific product
CDC states that federal rules require users to follow each high-level disinfectant's FDA-cleared label claim for exposure time and temperature, and these differ from product to product. Lengthening exposure should be done cautiously because it can harm delicate scopes.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version
31.How should flexible endoscopes be stored after high-level disinfection and drying?
- A.Coiled in the carrying case used to ship them for repair
- B.Laid flat in a sealed plastic bag while still damp inside
- C.Coiled tightly in a closed drawer with the channel ports capped to keep moisture in
- D.Hanging vertically in a way that protects them from damage and contamination
Show answer
Answer: D. Hanging vertically in a way that protects them from damage and contamination
CDC recommends hanging endoscopes vertically to help them dry and storing them in a way that protects them from damage or contamination. The shipping carrying case should not be used for storage.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024), print version