Free CRCST Departmental Considerations practice test
HSPA gives this domain 15% of the exam. Answer each question, read why every choice is right or wrong, and see your score by topic.
- Work Environment, Air and Chemical Safety
- Attire, Traffic Control and Ergonomics
- Regulations, Standards, Records and Quality
CRCST Departmental Considerations
A small wastebasket fire starts in the department, and a trained technician decides to use a portable extinguisher. Where should the nozzle be aimed?
CRCST Departmental Considerations practice questions and answers
Read each question, choose your answer, then open the explanation.
1.A small wastebasket fire starts in the department, and a trained technician decides to use a portable extinguisher. Where should the nozzle be aimed?
- A.High, at the top of the flames, where the fire looks largest
- B.Up at the smoke above the fire, to cool the hot gases
- C.At the center of the flames, held steady in one spot
- D.Low, at the base of the fire, sweeping side to side
Show answer
Answer: D. Low, at the base of the fire, sweeping side to side
OSHA's PASS method is pull the pin, aim low at the base of the fire, squeeze the handle, and sweep from side to side. If the extinguisher runs out before the fire is out, or the fire spreads beyond its early stage, the technician should evacuate.
Checked against OSHA eTool, Evacuation Plans and Procedures: Fire Extinguisher Use
2.How should the air pressure in the decontamination area compare with the areas next to it?
- A.Negative, so air flows into decontamination from the adjoining spaces
- B.Positive, so air flows out of decontamination into the hallway
- C.Equal to the hallway, so that no air moves through the doorways in either direction
- D.Positive during cleaning and negative only after the shift ends
Show answer
Answer: A. Negative, so air flows into decontamination from the adjoining spaces
The decontamination area handles soiled items, so it is kept under negative pressure: air is drawn in from surrounding spaces and contaminants stay inside the room. CDC's guideline cites the AIA recommendation of negative pressure for this area.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024)
3.In the ventilation table of CDC's 2003 environmental infection control guideline, what pressure relationship is listed for sterile storage in central supply?
- A.Negative relative to the adjacent areas
- B.Negative, matching the soiled or decontamination room
- C.No set relationship, because storage rooms are unoccupied
- D.Positive relative to the adjacent areas
Show answer
Answer: D. Positive relative to the adjacent areas
Table B.2 lists sterile storage with air movement "Out", that is, positive pressure. Air leaving the room keeps less-clean air from neighboring spaces from settling on sterile packages.
Checked against CDC, Guidelines for Environmental Infection Control in Health-Care Facilities (2003), Appendix B, Table B.2 Ventilation requirements
4.Why is relative humidity above about 60% a concern in health-care facilities?
- A.It builds up static electricity that can damage electronic equipment
- B.It makes the ventilation system switch to negative pressure
- C.It causes chemical indicators to change color before processing
- D.It encourages the growth of fungi such as mold
Show answer
Answer: D. It encourages the growth of fungi such as mold
CDC's environmental guideline gives 30%-60% as the comfort range for most areas and notes that relative humidity above 60% promotes fungal growth. Damp conditions can also affect package integrity in storage.
Checked against CDC, Guidelines for Environmental Infection Control in Health-Care Facilities (2003, updated 2019)
5.When cleaning work surfaces and floors across a department, which order best limits the spread of contamination?
- A.From cleaner areas to dirtier areas, and from high surfaces to low
- B.From dirtier areas to cleaner areas, so the worst soil is removed first
- C.From low surfaces to high, so floors are finished before counters
- D.In any order, as long as the same cloth is used throughout
Show answer
Answer: A. From cleaner areas to dirtier areas, and from high surfaces to low
CDC's environmental cleaning best practices say to proceed from cleaner to dirtier areas and from high to low, with floors last. That way dirt is not carried into areas already cleaned or dropped onto them.
Checked against CDC, Best Practices for Environmental Cleaning in Healthcare Facilities in Resource-Limited Settings
6.Under OSHA's Hazard Communication standard, how must Safety Data Sheets be available to sterile processing staff?
- A.Readily accessible in their work area during each work shift
- B.Kept by the safety officer and given out on written request
- C.Posted online by the manufacturer, with no copy kept at the facility
- D.Available only to supervisors, who explain them to staff as needed
Show answer
Answer: A. Readily accessible in their work area during each work shift
OSHA 1910.1200(g)(8) requires employers to keep Safety Data Sheets for each hazardous chemical and make them readily accessible to employees during each work shift in their work areas. Electronic access is allowed if it creates no barriers.
Checked against OSHA, 29 CFR 1910.1200 Hazard Communication
7.Where corrosive chemicals could splash into a worker's eyes, what does OSHA 29 CFR 1910.151(c) require?
- A.An eyewash station located anywhere in the same building as the work area
- B.A first aid kit with sterile saline eye drops
- C.Safety glasses in place of any flushing equipment
- D.Facilities for quick drenching or flushing within the work area
Show answer
Answer: D. Facilities for quick drenching or flushing within the work area
OSHA 1910.151(c) says that when corrosive materials could injure a worker's eyes or body, the employer must supply equipment for fast drenching or flushing right in the work area, ready for emergency use. An eyewash near the task meets this; one elsewhere in the building does not.
Checked against OSHA, 29 CFR 1910.151 Medical services and first aid
8.When must an employer train sterile processing staff on the hazardous chemicals in their work area?
- A.Only after an employee has been exposed to a chemical
- B.When first assigned to the area and whenever a new chemical hazard arrives
- C.Once every five years, timed to match the facility's accreditation survey cycle
- D.Only when the employee asks to see a Safety Data Sheet
Show answer
Answer: B. When first assigned to the area and whenever a new chemical hazard arrives
OSHA 1910.1200(h)(1) requires hazard communication training when an employee is first assigned to the work area and again whenever a chemical hazard they have not yet been trained on is brought into that area.
Checked against OSHA, 29 CFR 1910.1200 Hazard Communication
9.Under OSHA's Hazard Communication standard, which label pictogram warns that a chemical can burn skin, damage eyes or eat into metal?
- A.Exclamation mark
- B.Corrosion
- C.Health hazard
- D.Skull and crossbones
Show answer
Answer: B. Corrosion
OSHA's pictogram quick card lists skin corrosion or burns, eye damage and corrosion to metals under the corrosion pictogram. Strong alkaline or acid cleaning chemicals often carry it.
Checked against OSHA QuickCard, Hazard Communication Standard Pictogram (OSHA 3491)
10.A technician plans to take a contaminated reusable cover gown home to wash so it is ready for the next shift. What does OSHA's Bloodborne Pathogens standard say?
- A.The employer must clean and launder PPE at no cost to the employee
- B.Home laundering is allowed if the gown is washed in hot water with bleach
- C.Home laundering is allowed if the gown is carried home in a sealed bag
- D.Each employee is responsible for laundering the PPE they personally wear
Show answer
Answer: A. The employer must clean and launder PPE at no cost to the employee
OSHA 1910.1030 requires the employer to provide PPE at no cost and to clean, launder, and dispose of it. PPE must also be removed before leaving the work area, so it should not go home.
Checked against OSHA, 29 CFR 1910.1030 Bloodborne pathogens
11.According to CDC, which hand hygiene method is preferred for health-care workers in most situations when hands are not visibly soiled?
- A.Plain soap and water for at least two minutes
- B.Alcohol-based hand sanitizer
- C.An antimicrobial surgical scrub with a brush
- D.Rinsing hands under warm running water
Show answer
Answer: B. Alcohol-based hand sanitizer
CDC states alcohol-based hand sanitizer is preferred in most clinical situations unless hands are visibly soiled. It is quick, effective against many germs, and easier on the skin than frequent washing.
Checked against CDC, Clinical Safety: Hand Hygiene for Healthcare Workers
12.A technician's hands are visibly soiled after a glove tore during manual cleaning. What hand hygiene does CDC call for?
- A.Use alcohol-based hand sanitizer
- B.Put on a new pair of gloves
- C.Wipe hands with a disinfectant wipe
- D.Wash with soap and water
Show answer
Answer: D. Wash with soap and water
CDC directs health-care workers to wash with soap and water when hands are visibly soiled. Alcohol-based sanitizer does not remove visible soil, so it is used when hands look clean.
Checked against CDC, Clinical Safety: Hand Hygiene for Healthcare Workers
13.A technician wants to keep a water bottle on the decontamination counter during the shift. What does OSHA's Bloodborne Pathogens standard say?
- A.Drinking and keeping drinks are not allowed where there is a reasonable likelihood of exposure
- B.Drinks are allowed in decontamination as long as the bottle has a screw-top lid and stays closed
- C.Drinks are allowed if the technician changes gloves before each sip
- D.Drinks are allowed during the hours when no soiled trays are arriving
Show answer
Answer: A. Drinking and keeping drinks are not allowed where there is a reasonable likelihood of exposure
OSHA 1910.1030(d)(2)(ix) bans eating and drinking (along with smoking, cosmetics, and handling contact lenses) in work areas where occupational exposure is reasonably likely, and (d)(2)(x) bans storing food or drink on counters or shelves where blood or other infectious materials are present. Decontamination is such an area, so the bottle belongs outside it.
Checked against OSHA, 29 CFR 1910.1030 Bloodborne Pathogens
14.In what order should reusable instruments move through a sterile processing department?
- A.Preparation and packaging, then decontamination, then sterilization, then storage
- B.Sterile storage, then decontamination, then sterilization, then packaging
- C.Decontamination, then sterilization, then packaging, then back to decontamination for a final check
- D.Decontamination, then preparation and packaging, then sterilization, then sterile storage
Show answer
Answer: D. Decontamination, then preparation and packaging, then sterilization, then sterile storage
CDC describes central processing divided into decontamination, packaging, and sterilization and storage areas. Items move one way from dirty to clean so contaminated items never re-enter clean areas.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024)
15.How does OSHA describe ergonomics?
- A.Training workers to tolerate heavier loads
- B.Choosing workers who match the job's demands
- C.Fitting a job to a person
- D.Scheduling longer breaks to replace equipment changes
Show answer
Answer: C. Fitting a job to a person
OSHA defines ergonomics as fitting a job to a person, which reduces muscle fatigue and the number and severity of work-related musculoskeletal disorders.
Checked against OSHA, Ergonomics
16.A technician must lift a heavy instrument tray from a cart. Which technique fits NIOSH material-handling guidance?
- A.Hold the tray at arm's length and lift with a straight-legged bend at the waist
- B.Keep the tray close to the body, lift with the legs, and step to turn instead of twisting
- C.Lift quickly with a jerk so the load spends less time in the hands
- D.Twist at the waist while lifting so the tray moves straight onto the shelf in one smooth motion
Show answer
Answer: B. Keep the tray close to the body, lift with the legs, and step to turn instead of twisting
NIOSH advises holding the load as near the body as you can, pushing up with the legs rather than the back, moving smoothly without jerking, and stepping to one side to turn instead of twisting.
Checked against NIOSH/Cal-OSHA, Ergonomic Guidelines for Manual Material Handling (DHHS NIOSH Publication 2007-131)
17.FDA sorts medical devices into classes by risk. Which class carries the greatest risk and generally requires premarket approval?
- A.Class I
- B.Class III
- C.Class II
- D.Class IV
Show answer
Answer: B. Class III
FDA uses Class I, II and III, with Class III for devices of greatest risk. Class III devices need general controls plus premarket approval, while Class I devices have general controls only.
Checked against FDA, Classify Your Medical Device
18.Which federal agency regulates firms that manufacture medical devices sold in the United States?
- A.Occupational Safety and Health Administration (OSHA)
- B.Food and Drug Administration (FDA)
- C.Environmental Protection Agency (EPA)
- D.Centers for Disease Control and Prevention (CDC)
Show answer
Answer: B. Food and Drug Administration (FDA)
FDA's Center for Devices and Radiological Health oversees companies that make, repackage, relabel, or import medical devices for the US market, including premarket review through 510(k) clearance and PMA approval.
Checked against FDA, Overview of Device Regulation
19.Which agency's mission is to ensure safe and healthful working conditions for employees, such as sterile processing technicians?
- A.FDA
- B.CMS
- C.OSHA
- D.EPA
Show answer
Answer: C. OSHA
OSHA exists to make sure US workers have safe and healthful working conditions, which it does by setting and enforcing standards and through training and outreach. Its standards include bloodborne pathogens, hazard communication, and ethylene oxide.
Checked against OSHA, About OSHA
20.A technician is unsure how to disassemble and clean a new powered instrument. What should guide the process?
- A.How the department reprocesses a similar instrument from another brand
- B.Advice from an experienced coworker who has seen one before
- C.The manufacturer's written reprocessing instructions for that device
- D.The setting the department uses for most of its other trays
Show answer
Answer: C. The manufacturer's written reprocessing instructions for that device
FDA explains that a reusable device can be safely reused when its labeling instructions are followed completely and correctly after each use. The manufacturer's IFU is the governing document; contact the manufacturer if it is unclear.
Checked against FDA, Reprocessing of Reusable Medical Devices
21.Why does each sterilized package carry a load number?
- A.So the package can be sterilized again without reinspection
- B.So the department can bill each unit for its supplies
- C.So items from a load can be traced and recalled if a problem is found
- D.So storage staff can shelve items in numerical order
Show answer
Answer: C. So items from a load can be traced and recalled if a problem is found
CDC lists traceability of load contents as part of a quality control program. Load numbers link each item to its cycle records, so items from a suspect load can be found and recalled.
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024)
22.What is FDA's MedWatch program?
- A.A CDC network that tracks surgical site infection rates
- B.An OSHA log for recording worker injuries and illnesses
- C.A manufacturer recall database run by The Joint Commission
- D.FDA's safety information and adverse event reporting program
Show answer
Answer: D. FDA's safety information and adverse event reporting program
MedWatch is FDA's Safety Information and Adverse Event Reporting Program. Health professionals can submit voluntary reports of device problems using Form FDA 3500.
Checked against FDA, Medical Device Reporting (MDR): How to Report Medical Device Problems
23.According to CDC, when should competency testing be done for staff who reprocess critical and semicritical instruments?
- A.Only after a sterilization failure is discovered
- B.At the start of employment and regularly after that, such as annually
- C.Once, at hiring, with no further testing needed
- D.Only when the staff member applies for certification
Show answer
Answer: B. At the start of employment and regularly after that, such as annually
CDC recommends hands-on training, supervision until competency is documented, and competency testing at the beginning of employment and regularly thereafter (for example, annually).
Checked against CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2024)