This topic covers metric and US customary conversions, temperature, perimeter, area and volume, mean, median, mode and range, and reading tables and graphs. Write the units at every step: they tell you whether to multiply or divide and whether an answer is a length, an area, or a volume.
Metric units
Each metric unit is a power of 10 larger or smaller than the next, so converting just shifts the decimal point.
- kilo- = 1,000: 1 kg = 1,000 g.
- centi- = 1/100: 1 m = 100 cm.
- milli- = 1/1,000: 1 g = 1,000 mg, 1 L = 1,000 mL, and 1 cm = 10 mm.
- micro- = 1/1,000,000; in US medical writing a microgram is abbreviated mcg: 1 mg = 1,000 mcg.
- Converting to a smaller unit means multiplying, since it takes more of them; converting to a larger unit means dividing.
- A milliliter is the same volume as a cubic centimeter (1 mL = 1 cm³).
Example
Convert 0.75 g to mg, 3,200 mcg to mg, 45 mm to cm, and 1.2 L to mL.
Solution
0.75 g × 1,000 = 750 mg. 3,200 mcg ÷ 1,000 = 3.2 mg. 45 mm ÷ 10 = 4.5 cm. 1.2 L × 1,000 = 1,200 mL.
US customary and metric conversions
- US customary: 12 in = 1 ft; 3 ft = 1 yd; 16 oz = 1 lb; 8 fl oz = 1 cup; 2 cups = 1 pt; 2 pt = 1 qt; 4 qt = 1 gal.
- Metric and US: 1 in = 2.54 cm; 1 kg ≈ 2.2 lb; 1 fl oz ≈ 30 mL.
- For kilograms, divide a weight in pounds by 2.2; for pounds, multiply kilograms by 2.2.
- Quick check: the kilogram number should be under half the pound number, and the centimeter number should be more than double the inch number.
Example
A patient weighs 154 lb, a cut is 6 in long, and a bottle holds 4 fl oz. Convert to kg, cm, and mL.
Solution
154 ÷ 2.2 = 70 kg. 6 × 2.54 = 15.24 cm. 4 × 30 = 120 mL.
Temperature
- °C to °F: °F = 9/5 × °C + 32; do the multiplication, then add 32.
- Fahrenheit back to Celsius: subtract 32 first, then multiply by 5/9, so °C = (°F − 32) × 5/9.
- Because 9/5 equals 1.8, °F = 1.8 × °C + 32 is the same formula.
Example
Convert 38°C to °F and 212°F to °C.
Solution
38°C: 9/5 × 38 = 68.4, and 68.4 + 32 = 100.4°F. 212°F: 212 − 32 = 180, and 5/9 × 180 = 100°C.
Perimeter and area
- Perimeter measures the length of a shape's outer edge, in plain units (ft, cm).
- Area measures the flat space a shape covers, in square units (ft², cm²).
- Rectangle: P = 2L + 2W; A = L × W.
- Triangle: A = ½ × base × height.
- Circle: d = 2r; circumference C = πd = 2πr; area A = πr²; use π ≈ 3.14 unless a problem says otherwise.
- For a circle's area, square the radius; squaring the diameter gives an answer four times too big.
Example
Three shapes: a rectangle 9 ft long and 6 ft wide (perimeter and area), a triangle whose base is 14 cm and height is 5 cm (area), and a circle of radius 5 cm (circumference and area).
Solution
Rectangle: P = 2(9) + 2(6) = 30 ft; A = 9 × 6 = 54 ft². Triangle: A = ½ × 14 × 5 = 35 cm². Circle: C = 2 × 3.14 × 5 = 31.4 cm; A = 3.14 × 5² = 3.14 × 25 = 78.5 cm².
Volume
- Volume measures how much space a solid takes up, in cubic units (in³, cm³).
- Rectangular box: V = L × W × H.
- Cylinder: V = πr²h; find r², then multiply by π and by the height.
- Surface area is the total area of a solid's outer faces, in square units, and is not the same as volume.
Example
Find the volume of a box 10 in long, 6 in wide, and 4 in tall, and of a cylinder with radius 3 cm and height 10 cm.
Solution
Box: 10 × 6 × 4 = 240 in³. Cylinder: 3.14 × 3² × 10 = 3.14 × 9 × 10 = 282.6 cm³.
Mean, median, mode and range
- Mean (average): total the values, then divide by the number of values.
- Median: sort the values and pick the one in the middle; if the count is even, average the middle pair.
- Mode: the value that shows up most often; a set may have two or more modes.
- Range: the largest value minus the smallest.
- Always sort first; the value printed in the middle of a table is not necessarily the median.
Example
Daily admissions were 12, 15, 9, 20, 15, and 8. Find the mean, median, mode, and range.
Solution
Sorted: 8, 9, 12, 15, 15, 20. Mean = 79 ÷ 6 = 13.166…, about 13.17. Median = (12 + 15) ÷ 2 = 13.5. Mode = 15. Range = 20 − 8 = 12.
Reading tables and graphs
- Check the title, the column or axis labels, and the units before you read off any value.
- The independent variable is the one that is set or changed, usually on the x-axis; the dependent variable responds to it, usually on the y-axis.
- Positive correlation: when one variable goes up, the other tends to go up too.
- Negative (inverse) correlation: when one variable goes up, the other tends to go down.
- No correlation: the points form no clear pattern.
- A correlation means two things change together; it does not prove one causes the other.
Example
A scatter plot shows weekly exercise hours (x-axis) against resting heart rate (y-axis). The points fall from the upper left to the lower right. Name the independent variable and the type of correlation.
Solution
Exercise hours is the independent variable. As exercise hours go up, resting heart rate tends to go down, so the correlation is negative.
Key terms
- kilo-
- 1,000 times the base unit: 1 kg = 1,000 g.
- centi-
- 1/100 of the base unit: 100 cm = 1 m.
- milli-
- 1/1,000 of the base unit: 1,000 mg = 1 g; 1,000 mL = 1 L.
- micro- (mcg)
- 1/1,000,000 of the base unit: 1,000 mcg = 1 mg.
- Inches to centimeters
- 1 in = 2.54 cm; multiply inches by 2.54.
- Kilograms and pounds
- 1 kg ≈ 2.2 lb; divide pounds by 2.2 to get kg.
- Fluid ounces to milliliters
- 1 fl oz ≈ 30 mL.
- Celsius to Fahrenheit
- °F = 9/5 × °C + 32.
- Fahrenheit to Celsius
- °C = 5/9 × (°F − 32).
- Rectangle perimeter and area
- P = 2L + 2W; A = L × W.
- Area of a triangle
- A = ½ × base × height.
- Circumference
- C = πd = 2πr, with π ≈ 3.14.
- Area of a circle
- A = πr²; square the radius, not the diameter.
- Volume of a box
- V = length × width × height, in cubic units.
- Volume of a cylinder
- V = πr²h.
- Mean
- Sum of the values ÷ number of values.
- Median
- Middle value after sorting; with an even count, the average of the two middle values.
- Mode
- The value or values that occur most frequently in a data set.
- Range
- Greatest value − least value.
- Independent variable
- The quantity you choose or change; the other quantity depends on it.
Common mistakes
- Converting in the wrong direction, such as multiplying pounds by 2.2 to get kilograms, or using 2 instead of 2.2.
- Adding or subtracting a conversion factor instead of multiplying or dividing by it.
- In temperature conversions, adding 32 before multiplying, using 5/9 instead of 9/5 for °C to °F, or forgetting the 32.
- Mixing up perimeter and area, or forgetting the ½ in the triangle formula.
- Squaring the diameter instead of the radius, using 2r instead of r², or leaving out the height in a cylinder.
- Taking the middle value without sorting, not averaging the two middle values in an even set, or giving the greatest value as the range.
Checked against: NIST, Metric (SI) Prefixes; Wikipedia, Microgram; Wikipedia, United States customary units; Wikipedia, Litre; Wikipedia, Fahrenheit; Wikipedia, Perimeter; Wikipedia, Area; Wikipedia, Circle; Wikipedia, Volume; Wikipedia, Cylinder; Wikipedia, Arithmetic mean; Wikipedia, Median; Wikipedia, Mode (statistics); Wikipedia, Range (statistics); Wikipedia, Dependent and independent variables; Wikipedia, Scatter plot; Wikipedia, Correlation