Skip to content
MedCareerPrep
Open app
☰

TEAS Scientific Reasoning: study notes and practice questions

On the TEAS 7, 9 of the 44 scored Science questions come from this topic. It covers scientific measurement and tools, designing experiments (variables, controls, hypotheses), using evidence to support a conclusion, and reading data.

Study notes ↓Chapter quiz ↓All free questions ↓

All chapters

TEAS Scientific Reasoning study notes

This topic covers how scientists measure, design experiments and decide what evidence shows. For any study, name the variables, look for a control group, and claim only what the data support.

Hypotheses, observations and inferences

  • Science starts with an observation that raises a question; a hypothesis is a proposed explanation that can be tested, so that some possible result could show it to be wrong.
  • A hypothesis leads to a prediction you can check, which can be phrased as if–then: if wound dressings are changed daily, then fewer wounds will become infected than with changes every three days.
  • Opinions, recommendations and definitions are not hypotheses, because no measurement can prove them wrong.
  • A theory is an explanation that has been tested and confirmed, not a guess.
  • An observation is something measured or sensed directly (a temperature of 39.0 °C, a pulse of 96); an inference is a conclusion drawn from observations (the patient may be dehydrated).
  • Inductive reasoning moves from many specific observations to a general rule; deductive reasoning applies a general rule to predict a specific result.

Designing an experiment

  • The independent variable is what the experimenter deliberately changes; the dependent variable is what is measured to see the effect.
  • Controlled variables are everything else, kept the same for every group so that only the independent variable differs.
  • A control group gets everything except the treatment (for example, 0% disinfectant) and gives a baseline for comparison.
  • Random assignment gives every participant an equal chance of landing in each group, so the groups are likely to start out alike.
  • A placebo makes the control group's experience look the same; in a double-blind study neither participants nor researchers know who got the treatment, which guards against bias from expectations.
  • Larger samples and repeated trials make results more precise, because one unusual person or reading carries less weight in the average.
  • A study that only records existing habits can show that two things go together (correlation), not that one causes the other; a confounding variable may explain both.

Example

A student tests whether fertilizer increases tomato yield. Ten plants get fertilizer and ten get none; all get the same soil, water and light; the tomatoes are weighed after 8 weeks. Identify the variables.

Solution

Independent variable: fertilizer or none. Dependent variable: mass of tomatoes. Controlled variables: soil, water, light and the 8-week period. Control group: the ten unfertilized plants.

Measurement tools and units

  • Use a graduated cylinder for liquid volume (it is more precise than a beaker), a balance for mass, and a ruler for length.
  • For water in a glass cylinder, read the bottom of the meniscus with your eye level with the surface.
  • Record every certain digit plus one estimated digit: on a cylinder marked every 1 mL, a level halfway between 42 and 43 is recorded as 42.5 mL.
  • Pressing tare with an empty dish on the balance resets the display to zero, so it then shows only the mass of what you add.
  • Weigh a container in the same condition you use it: if it is weighed wet but used dry, the subtracted mass is too large and the sample mass comes out too low.
  • Metric prefixes: kilo = 1,000, centi = 1/100, milli = 1/1,000, micro = 1/1,000,000; so 1 kg = 1,000 g, 1 g = 1,000 mg, 1 L = 1,000 mL, 1 m = 1,000 mm, and 1 mL = 1 cm³.
  • Accuracy is how close a measurement is to the true value; precision is how close repeated measurements are to each other, so readings can be precise but not accurate.

Example

Which mass is largest: 1.2 kg, 1,150 g or 1,300,000 mg?

Solution

Convert to grams: 1.2 kg × 1,000 = 1,200 g; 1,150 g; 1,300,000 mg ÷ 1,000 = 1,300 g. The largest is 1,300,000 mg.

Significant figures and scientific notation

  • Nonzero digits are significant, zeros between nonzero digits are significant, leading zeros are never significant, and trailing zeros after a decimal point are significant.
  • So 0.0350 has 3 significant figures, 2.005 has 4, and 0.06 has 1.
  • When multiplying or dividing, round to the fewest significant figures in the data: 10.5 g ÷ 3.2 mL = 3.28125 on a calculator, reported as 3.3 g/mL.
  • When adding or subtracting, round to the fewest decimal places in the data.
  • Scientific notation writes a number as N × 10ⁿ with N at least 1 but less than 10; numbers below 1 get negative exponents, so 0.00042 = 4.2 × 10⁻⁴.
  • To multiply, multiply the coefficients and add the exponents; to divide, divide the coefficients and subtract the exponents; in either case, rewrite the result if the coefficient is 10 or more.
  • In scientific notation, only the coefficient's digits are significant, so 2.0 × 10³ has 2.

Example

Calculate (3.0 × 10⁵) × (4.0 × 10³).

Solution

Multiply the coefficients: 3.0 × 4.0 = 12. Add the exponents: 5 + 3 = 8, giving 12 × 10⁸. Rewrite 12 as 1.2 × 10¹, so the answer is 1.2 × 10⁹.

Reading data and drawing conclusions

  • Find the trend first: does the dependent variable rise, fall, peak or level off as the independent variable changes?
  • Compare step sizes: if equal steps in the independent variable give smaller and smaller changes, the effect is leveling off.
  • You can estimate between tested values, but do not claim an exact result at a value that was not tested.
  • Percent change = (new value − original value) ÷ original value × 100.
  • Mean = sum of the values ÷ number of values.
  • A sound conclusion claims only what the data show: for the groups and conditions tested, and not cause and effect unless an experiment tested it.

Example

A table shows 20 units of product at 30 °C and 26 units at 40 °C. Find the percent increase, and estimate the amount at 35 °C.

Solution

Increase = 26 − 20 = 6; 6 ÷ 20 × 100 = 30%. 35 °C is halfway between the tested temperatures, so estimate halfway between the amounts: (20 + 26) ÷ 2 = 23 units.

Key terms

Hypothesis
A proposed explanation that can be tested and could be shown false by results.
Independent variable
The factor the experimenter deliberately changes.
Dependent variable
The result that is measured to see the effect of the change.
Controlled variable
A factor kept the same for every group so it cannot affect the result.
Control group
The group that does not receive the treatment and serves as a baseline.
Confounding variable
A third factor that could explain a link between two other variables.
Placebo
An inactive treatment, such as a sugar pill, given so the control group's experience matches.
Double-blind study
A study in which neither participants nor researchers know who is in which group.
Observation
Information gathered directly by measuring or by the senses.
Inference
A conclusion drawn from observations rather than seen directly.
Accuracy
How close a measurement comes to the true value.
Precision
How closely repeated measurements agree with one another.
Significant figures
The certain digits of a measurement plus one estimated digit.
Meniscus
The curved liquid surface in a cylinder; read volume at its bottom, at eye level.
Tare
To zero a balance with the container on it so only the contents are weighed.
Percent change
(new − original) ÷ original × 100.

Common mistakes

  • Swapping the variables. The independent variable is what you set and the dependent variable is what you measure; factors held constant are controlled variables, not the control group.
  • Claiming cause from an observational study. A study that only records existing habits shows that two things are linked, and a confounding variable may be the real cause.
  • Mixing up accuracy and precision. Readings that agree closely can all be far from the true value, and readings that average to the true value can still be scattered.
  • Miscounting significant figures. Leading zeros never count, but zeros between digits and trailing zeros after a decimal point do.
  • Overreaching from data. Do not claim a result at a value that was not tested, for people who were not studied, or a trend that the numbers contradict.
  • Slipping on powers of ten. After multiplying coefficients, rewrite a result such as 10 × 10⁸ as 1.0 × 10⁹, and subtract exponents carefully when dividing.

Checked against: Wiktionary, observation; Wiktionary, inference; Santa Monica College (LibreTexts), Introducing Measurements in the Laboratory; California State University Dominguez Hills (LibreTexts), Proper Use of a Buret; California State University Dominguez Hills (LibreTexts), Proper Use of Balances; Wikipedia, Hypothesis; Wikipedia, Scientific method; Wikipedia, Scientific theory; Wikipedia, Inductive reasoning; Wikipedia, Dependent and independent variables; Wikipedia, Scientific control; Wikipedia, Random assignment; Wikipedia, Placebo; Wikipedia, Blinded experiment; Wikipedia, Confounding; Wikipedia, Correlation; Wikipedia, Sample size determination; Wikipedia, Graduated cylinder; Wikipedia, Meniscus (liquid); NIST, Metric (SI) Prefixes; Wikipedia, Litre; Wikipedia, Accuracy and precision; Wikipedia, Significant figures; Wikipedia, Scientific notation; Wikipedia, Relative change; Wikipedia, Arithmetic mean; Wikipedia, Linear interpolation

Chapter quiz

6 questions from this chapter, with an explanation after each answer.

1/6

Scientific Reasoning

Starch digested by amylase in 10 minutes at different temperatures

Temperature (°C)Starch digested (mg)
1012
2025
3041
4052
5030
608

A student mixed equal amounts of amylase and starch at six temperatures and measured how much starch was digested in 10 minutes. What is the independent variable?

Scientific Reasoning questions and answers

Read each question, choose your answer, then open the explanation.

  1. Starch digested by amylase in 10 minutes at different temperatures

    Temperature (°C)Starch digested (mg)
    1012
    2025
    3041
    4052
    5030
    608

    1.A student mixed equal amounts of amylase and starch at six temperatures and measured how much starch was digested in 10 minutes. What is the independent variable?

    • A.The temperature of each sample
    • B.The mass of starch digested
    • C.The length of the reaction time
    • D.The amount of amylase in each sample
    Show answer

    Answer: A. The temperature of each sample

    Temperature is the factor the student deliberately set at different values, so it is the independent variable. The starch digested is the measured result, while reaction time and amount of enzyme were kept the same.

    Checked against Wikipedia, Dependent and independent variables

  2. Uses the passage above.

    2.Using the table, how many more milligrams of starch were digested at 40 °C than at 60 °C?

    Show answer

    Answer: 44 mg

    At 40 °C, 52 mg of starch was digested; at 60 °C, 8 mg was digested. 52 − 8 = 44 mg.

    Checked against Wikipedia, Subtraction

  3. Uses the passage above.

    3.Which conclusion is best supported by the data in the table?

    • A.Starch digestion increased with every rise in temperature from 10 °C to 60 °C.
    • B.Of the temperatures tested, amylase digested the most starch at 40 °C.
    • C.Amylase digests the most starch at exactly 37 °C.
    • D.Heating amylase to 60 °C permanently destroys it.
    Show answer

    Answer: B. Of the temperatures tested, amylase digested the most starch at 40 °C.

    Digestion rose from 12 mg at 10 °C to a peak of 52 mg at 40 °C, then fell to 30 mg at 50 °C and 8 mg at 60 °C. The data support only that 40 °C gave the most digestion of the temperatures tried; they say nothing about untested temperatures or whether the drop at 60 °C is permanent.

    Checked against Wikipedia, Enzyme

  4. Bean Seedlings and Hours of Light

    A student planted 40 bean seeds of the same variety in identical pots filled with the same potting soil and divided the pots into four groups of 10. Each group received 4, 8, 12, or 16 hours of light per day from the same type of lamp. All pots were kept in one room at 22 °C and were given 50 mL of water every other day.

    After 21 days, the student measured every seedling and calculated the mean height for each group: 4 hours, 6.2 cm; 8 hours, 9.8 cm; 12 hours, 13.1 cm; 16 hours, 13.4 cm.

    4.What is the dependent variable in this investigation?

    • A.Hours of light each pot received per day
    • B.Temperature of the room the pots were in
    • C.Seedling height after 21 days
    • D.Volume of water given every other day
    Show answer

    Answer: C. Seedling height after 21 days

    The student changed the hours of light and measured seedling height to see what happened, so height after 21 days is the dependent variable. Room temperature and water were kept the same for every group.

    Checked against Wikipedia, Dependent and independent variables

  5. Uses the passage above.

    5.Which factors were kept the same for all four groups of seedlings? Select all that apply.

    • A.Hours of light per day
    • B.Type of potting soil
    • C.Volume of water per watering
    • D.Mean seedling height
    • E.Room temperature

    Select all that apply.

    Show answer

    Answer: B. Type of potting soil; C. Volume of water per watering; E. Room temperature

    Soil type, the 50 mL of water, and the 22 °C room were the same for every group, so they are controlled variables. Hours of light was changed on purpose (independent variable), and mean height was the measured result (dependent variable).

    Checked against Wikipedia, Scientific control

  6. Uses the passage above.

    6.Which statement is best supported by the results?

    • A.Light had no clear effect on seedling height, since every group grew to a similar mean height.
    • B.Each extra 4 hours of light added about the same amount of height, roughly 3 to 4 cm per step.
    • C.Seedlings given 16 hours of light grew about twice as tall, on average, as those given 8 hours.
    • D.Mean height rose over 3 cm per step from 4 to 12 hours but only 0.3 cm from 12 to 16 hours.
    Show answer

    Answer: D. Mean height rose over 3 cm per step from 4 to 12 hours but only 0.3 cm from 12 to 16 hours.

    The changes were 9.8 − 6.2 = 3.6 cm, 13.1 − 9.8 = 3.3 cm, and 13.4 − 13.1 = 0.3 cm, so growth leveled off after 12 hours. The 16-hour group was 13.4 ÷ 9.8 ≈ 1.4 times as tall as the 8-hour group, not twice as tall.

    Checked against Wikipedia, Diminishing returns

  7. Bacterial colonies after 48 hours on plates treated with a disinfectant

    Disinfectant concentration (%)Plate 1 coloniesPlate 2 coloniesPlate 3 colonies
    0210198204
    1150162156
    2889491
    4202623
    8021

    7.A student spread the same bacteria on 15 agar plates, treated sets of three plates with different concentrations of a disinfectant, and counted colonies after 48 hours. Which plates serve as the control?

    • A.The 8% plates, because they had almost no growth
    • B.The 0% plates, because they received no disinfectant
    • C.Plate 1 at each concentration, because it was tested first
    • D.The 2% plates, because they are in the middle of the range
    Show answer

    Answer: B. The 0% plates, because they received no disinfectant

    A control group does not receive the treatment, so it gives a baseline for comparison. The 0% plates show how many colonies grow with no disinfectant at all.

    Checked against Wikipedia, Scientific control

  8. Uses the passage above.

    8.Using the table, what is the mean number of colonies on the three plates treated with 2% disinfectant?

    Show answer

    Answer: 91 colonies

    (88 + 94 + 91) ÷ 3 = 273 ÷ 3 = 91 colonies.

    Checked against Wikipedia, Arithmetic mean

  9. 9.A student needs to measure out 35 mL of saline as precisely as possible. Which of these tools is the best choice?

    • A.A 250 mL beaker with volume markings
    • B.A 50 mL graduated cylinder
    • C.An electronic balance that measures in grams
    • D.A metric ruler marked in millimeters
    Show answer

    Answer: B. A 50 mL graduated cylinder

    A graduated cylinder is made for measuring liquid volume, and a 50 mL cylinder holds 35 mL with closely spaced markings. Beaker markings give only rough volumes, a balance measures mass, and a ruler measures length.

    Checked against Wikipedia, Graduated cylinder

  10. 10.Water in a glass graduated cylinder forms a curved surface called a meniscus. How should the volume be read?

    • A.At the top edges of the curve, where the water climbs the glass
    • B.At the bottom of the curve, viewed from slightly above the liquid
    • C.At the nearest graduation mark, without estimating between marks
    • D.At the bottom of the curve, with the eye level with the liquid surface
    Show answer

    Answer: D. At the bottom of the curve, with the eye level with the liquid surface

    For water in glass, the meniscus curves down in the middle, and the volume is read at the bottom of that curve. Keeping the eye level with the surface prevents parallax error.

    Checked against Wikipedia, Meniscus (liquid)

  11. 11.Which statement is a testable hypothesis?

    • A.Walking for 20 minutes after each meal is the most enjoyable and relaxing way for patients to get exercise.
    • B.Patients with diabetes should walk for 20 minutes after every meal because exercise is good for their health.
    • C.Blood glucose is the amount of sugar carried in the blood, usually measured in milligrams per deciliter.
    • D.If patients walk 20 minutes after a meal, their blood glucose two hours later will be lower than if they rest.
    Show answer

    Answer: D. If patients walk 20 minutes after a meal, their blood glucose two hours later will be lower than if they rest.

    The if–then statement predicts a measurable result: it names what to change (walking after a meal) and what to measure (blood glucose two hours later). The other choices are an opinion, a recommendation, and a definition.

    Checked against Wikipedia, Hypothesis