Skip to content
MedCareerPrep
Open app
☰

HESI A2 Work, Energy and Momentum: study notes and practice questions

Part of the HESI A2 Physics section. This chapter covers work, kinetic and potential energy, power, simple machines, momentum and collisions.

Study notes ↓Chapter quiz ↓All free questions ↓

All chapters

HESI A2 Work, Energy and Momentum study notes

This topic covers work, kinetic and potential energy, conservation of energy and efficiency, power, simple machines and torque, and momentum, impulse and collisions. Most questions are one-formula calculations, so know each formula, its unit, and when a quantity is zero.

Work

  • Work W = Fd cos θ, where θ is the angle the force makes with the displacement.
  • When the force points along the motion, cos 0° = 1 and W = Fd.
  • Work is measured in joules: 1 J = 1 N·m (the watt is a unit of power, not work).
  • If nothing moves, no work is done: holding a box still does no work on it.
  • A force at right angles to the motion does no work (cos 90° = 0), such as the upward push on a tray carried level.
  • A force pointing against the motion does negative work (cos 180° = −1), such as friction on a sliding box.

Example

A worker pushes a cart 15 m with a constant 80 N force in the direction of motion. How much work is done?

Solution

W = Fd = 80 N × 15 m = 1,200 J. Multiply force by distance; do not add or divide them.

Kinetic and potential energy

  • Kinetic energy KE = ½mv², the energy of motion, in joules.
  • Since speed is squared, twice the speed means 4 times the KE, and three times the speed means 9 times the KE.
  • Work-energy theorem: the net work on an object equals the change in its kinetic energy.
  • Gravitational potential energy change ΔPE = mgh, where h is the change in height.
  • ΔPE depends only on how far the object rises, not the route, so a ramp trades a smaller force for a longer distance with the same energy gain.
  • In a fall without air resistance, PE becomes KE, so v = √(2gh); mass cancels out, and every object reaches the same speed.

Example

(1) Find the KE of a 2.0 kg ball moving at 3.0 m/s. (2) How much PE does a 5.0 kg box gain when lifted 2.0 m? (3) How fast is an object moving after falling 20 m from rest? (g = 9.8 m/s²)

Solution

(1) KE = ½ × 2.0 kg × (3.0 m/s)² = ½ × 2.0 × 9.0 = 9.0 J. (2) ΔPE = 5.0 kg × 9.8 m/s² × 2.0 m = 98 J. (3) v = √(2 × 9.8 × 20) = √392 ≈ 19.8 m/s; remember the 2 and the square root.

Conservation of energy, efficiency and power

  • Energy cannot be made or destroyed; it only converts between forms (kinetic, potential, chemical, thermal, electrical, radiant, nuclear).
  • Efficiency = useful energy output ÷ total energy input, always below 100% for real machines.
  • The shortfall has not vanished; it has turned into less useful forms, mostly thermal energy from friction.
  • A car's gasoline engine is roughly 20% to 40% efficient, and human muscle roughly 20%.
  • Power P = W ÷ t, the rate of doing work, measured in watts: 1 W = 1 J/s; 1 horsepower ≈ 746 W.

Example

A 70 kg person climbs stairs 4.0 m high in 8.0 s. What average power do they use to raise their body?

Solution

Work = mgh = 70 kg × 9.8 m/s² × 4.0 m = 2,744 J. Power = 2,744 J ÷ 8.0 s = 343 W.

Simple machines and torque

  • Simple machines (levers, pulleys, inclined planes, wheels and axles, wedges, screws) alter how big a force is or which way it acts.
  • Mechanical advantage MA = output force ÷ input force; for a lever, MA = input arm ÷ output arm.
  • With MA greater than 1, a smaller input force can move a larger load, but the input end must travel farther.
  • A machine cannot deliver more work than it receives.
  • One fixed pulley has MA = 1; it just redirects the force.
  • Torque τ = rF sin θ, in N·m; for a push at right angles, τ = rF.
  • Torque increases with the lever arm, so a push at a door's outer edge, far from the hinges, takes the least force.

Example

(1) A lever has a 2.0 m input arm and a 0.50 m output arm. What input force lifts a 600 N load? (2) A 60 N force is applied at right angles to a wrench, 40 cm from the bolt. What torque results?

Solution

(1) MA = 2.0 m ÷ 0.50 m = 4; input force = 600 N ÷ 4 = 150 N. (2) Convert 40 cm to 0.40 m; τ = 0.40 m × 60 N = 24 N·m.

Momentum and impulse

  • Momentum p = mv, measured in kg·m/s; it is a vector pointing the same way as the velocity.
  • Impulse = average force × time = change in momentum (FΔt = Δp).
  • For a given change in momentum, stretching out the stopping time lowers the average force.
  • Airbags, padding and crumple zones protect by making the stop take longer, not by shrinking the change in momentum.

Collisions

  • If no net outside force acts, a system's total momentum is unchanged by a collision.
  • In an elastic collision, total kinetic energy is also conserved.
  • In an inelastic collision, part of the kinetic energy turns into thermal energy, sound or deformation.
  • In a perfectly inelastic collision the objects stick and move off with one shared velocity: v = (m₁v₁ + m₂v₂) ÷ (m₁ + m₂).
  • While they collide, the two objects exert equal and opposite forces on each other, whatever their masses (Newton's third law).

Example

A 1,500 kg car moving at 12 m/s hits a stopped 1,000 kg car, and they lock together. What is their speed just afterward?

Solution

Momentum before = 1,500 kg × 12 m/s + 0 = 18,000 kg·m/s. After, the combined 2,500 kg carries the same momentum: v = 18,000 ÷ 2,500 = 7.2 m/s. (Kinetic energy falls from 108,000 J to 64,800 J, as expected for objects that stick.)

Key terms

Work
W = Fd cos θ; force times displacement along the force, in joules.
Joule (J)
SI unit of work and energy: 1 N·m.
Kinetic energy
½mv²; depends on the square of speed.
Gravitational potential energy
Change equals mgh; depends only on the change in height.
Work-energy theorem
W_net = ΔKE; what all the forces on an object do together equals its change in KE.
Conservation of energy
In any process the total amount stays constant; it only changes form.
Efficiency
Useful output ÷ total input, always below 100% in real devices.
Power
Rate of doing work, W ÷ t, in watts (J/s).
Watt (W)
SI unit of power: one joule per second.
Mechanical advantage
Output force ÷ input force; for a lever, input arm ÷ output arm.
Torque
Turning effect of a force: τ = rF sin θ, in N·m.
Momentum
p = mv, in kg·m/s, pointing the same way as the velocity.
Impulse
Average force × time; equals the change in momentum.
Elastic collision
Momentum and total kinetic energy are both conserved.
Perfectly inelastic collision
Objects stick together; momentum is conserved but some KE becomes heat and sound.

Common mistakes

  • Work is force × distance (not force + distance or force ÷ distance), measured in joules, not watts; and a force at 90° to the motion does zero work, however long the trip.
  • Kinetic energy depends on v²: doubling speed gives 4 times the KE (not 2 or 8 times), and 4 times is the new total, not the gain.
  • ΔPE = mgh needs g: forgetting the 9.8 m/s² gives an answer about ten times too small; and the path (ramp or straight lift) does not change the energy gained.
  • Energy is never destroyed or created; efficiency is below 100% because some energy becomes thermal energy. Power is work divided by time (not multiplied), and a machine reduces the force needed, not the work.
  • Convert centimeters to meters before computing torque (40 cm = 0.40 m), and for a lever divide the load by the MA rather than multiplying.
  • Momentum, not velocity, is conserved in a collision: weight each velocity by its mass and divide by the combined mass. Airbags lengthen the stopping time; they do not change the momentum change.

Checked against: Wikipedia, Work (physics); Wikipedia, Joule; Wikipedia, Kinetic energy; Wikipedia, Gravitational energy; Wikipedia, Free fall; Wikipedia, Conservation of energy; Wikipedia, Forms of energy; Wikipedia, Energy conversion efficiency; Wikipedia, Engine efficiency; Wikipedia, Power (physics); Wikipedia, Simple machine; Wikipedia, Pulley; Wikipedia, Torque; Wikipedia, Momentum; Wikipedia, Impulse (physics); Wikipedia, Crumple zone; Wikipedia, Newton's laws of motion

Chapter quiz

4 questions from this chapter, with an explanation after each answer.

1/4

Work, Energy and Momentum

A worker pushes a supply cart 12 m across a level floor with a constant horizontal force of 50 N in the direction of motion. How much work does the worker do on the cart?

Work, Energy and Momentum questions and answers

Read each question, choose your answer, then open the explanation.

  1. 1.A worker pushes a supply cart 12 m across a level floor with a constant horizontal force of 50 N in the direction of motion. How much work does the worker do on the cart?

    • A.62 J
    • B.4.2 J
    • C.600 W
    • D.600 J
    Show answer

    Answer: D. 600 J

    Because the force points along the motion, work = force × distance = 50 N × 12 m = 600 J. One joule is the work done when a force of one newton acts through one meter.

    Checked against Wikipedia, Work (physics)

  2. 2.Why is the efficiency of a real car engine always less than 100%?

    • A.Some of the input energy is destroyed by friction inside the engine.
    • B.Some of the input energy ends up in less useful forms, mainly thermal energy.
    • C.The engine creates extra energy that cannot be used.
    • D.Energy is not conserved when fuel is burned.
    Show answer

    Answer: B. Some of the input energy ends up in less useful forms, mainly thermal energy.

    Energy is never destroyed, but some of the fuel's chemical energy always becomes thermal energy and other less useful forms. Efficiency compares useful output with total input, so it is always below 100%; most car engines turn only about 20% to 40% of the fuel's energy into useful work.

    Checked against Wikipedia, Engine efficiency

  3. 3.How does an airbag reduce the force on a passenger in a crash?

    • A.It reduces the passenger's total change in momentum, so less force is needed to stop the passenger.
    • B.It lengthens the stopping time, so a smaller average force gives the same change in momentum.
    • C.It stops the passenger in a shorter time, so the force acts only briefly and does less harm.
    • D.It absorbs the entire force of the crash so that the passenger feels no force at all.
    Show answer

    Answer: B. It lengthens the stopping time, so a smaller average force gives the same change in momentum.

    The passenger's change in momentum is fixed by their mass and speed. Because impulse equals average force times time, spreading the stop over a longer time means a smaller average force for the same change in momentum.

    Checked against Wikipedia, Airbag

  4. 4.You push on a door at right angles to its surface. Where should you push to open it with the least force?

    • A.Close to the hinges
    • B.Halfway between the hinges and the outer edge
    • C.Anywhere, because the force needed is the same at every point
    • D.At the outer edge, farthest from the hinges
    Show answer

    Answer: D. At the outer edge, farthest from the hinges

    The torque that turns the door equals the force times the lever arm, the perpendicular distance from the hinges. Pushing at the far edge gives the longest lever arm, so the smallest force produces the needed torque.

    Checked against Wikipedia, Torque