This topic covers solutes and solvents, electrolytes and solubility, concentration (molarity and percent) and dilution, acids, bases, neutralization and pH, buffers, and radioactive decay, half-life, fission and fusion. Many items are short calculations, so learn each formula with its units and check that your answer makes sense.
Solutions and solubility
- A solution is a uniform (homogeneous) mixture: the solvent is whatever is present in the largest amount, and the solute is the lesser substance dissolved in it.
- In saline, water is the solvent and sodium chloride is the solute.
- Electrolytes form ions in water, so their solutions conduct electricity: strong electrolytes (ionic compounds, strong acids) ionize almost completely, weak electrolytes (weak acids such as acetic acid) only slightly.
- Nonelectrolytes, such as ethanol, dissolve as neutral molecules, so their solutions do not conduct.
- Most solids dissolve better in warmer water, but most gases become less soluble as temperature rises, so warming tap water releases bubbles.
- Gas solubility rises with the gas's pressure above the liquid (Henry's law), which is why an opened soda fizzes.
- "Like dissolves like": polar dissolves polar and nonpolar dissolves nonpolar, which is why oil and water separate.
Concentration: molarity and percent
- Molarity (M) = moles of solute ÷ liters of solution; always convert mL to L first.
- If the solute is given in grams, divide by its molar mass to get moles before dividing by liters.
- Mass-volume percent (m/v) = grams of solute per 100 mL of solution, so 0.9% saline has 0.9 g NaCl in every 100 mL.
Example
(1) What is the molarity of 0.75 mol of KCl in 500 mL of solution? (2) 14.61 g of NaCl (58.44 g/mol) is dissolved to make 500. mL. Molarity? (3) How many grams of NaCl are in 500 mL of 0.9% (m/v) saline?
Solution
(1) 500 mL = 0.500 L; 0.75 mol ÷ 0.500 L = 1.5 M. (2) 14.61 g ÷ 58.44 g/mol = 0.2500 mol; 0.2500 mol ÷ 0.500 L = 0.500 M. (3) 0.9 g per 100 mL × 5 = 4.5 g.
Dilution
- Adding solvent lowers the concentration, but the moles of solute stay the same.
- C₁V₁ = C₂V₂: stock concentration × stock volume = final concentration × final volume (any matching volume units).
- V₁ is the volume of stock to measure out; the water added is the final volume minus V₁.
Example
How much 12.0 M HCl stock is needed to make 500 mL of 3.0 M HCl?
Solution
V₁ = C₂V₂ ÷ C₁ = (3.0 M × 500 mL) ÷ 12.0 M = 125 mL of stock, then add water to a total of 500 mL (375 mL of water). A stronger stock always needs a smaller volume.
Acids, bases and neutralization
- A Brønsted-Lowry acid donates H⁺ (a proton); a base accepts it.
- Acids raise the hydronium (H₃O⁺) concentration in water; bases raise the hydroxide (OH⁻) concentration.
- The common strong acids ionize completely: HCl, HBr, HI, HNO₃, H₂SO₄ (its first H⁺) and HClO₄.
- Most other acids are weak and ionize only partly, including acetic acid (vinegar) and hydrofluoric acid (HF).
- Strong bases include NaOH, KOH and the hydroxides of calcium, strontium and barium; ammonia (NH₃) is a weak base.
- Neutralization: acid + base → salt + water, as in HCl + NaOH → NaCl + H₂O.
- Organic acids carry the carboxyl group –COOH (acetic acid); compare an alcohol (–OH), an aldehyde (–CHO) and an ester (–COOR).
- In a titration, moles = M × L, and the balanced equation's mole ratio links the acid and the base.
Example
How many mL of 0.250 M NaOH neutralize 25.0 mL of 0.100 M H₂SO₄? (H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O)
Solution
Moles of acid = 0.0250 L × 0.100 M = 0.00250 mol. Each H₂SO₄ needs 2 NaOH, so NaOH = 2 × 0.00250 = 0.00500 mol. Volume = 0.00500 mol ÷ 0.250 M = 0.0200 L = 20.0 mL.
pH and pOH
- pH = −log[H₃O⁺] and pOH = −log[OH⁻].
- At 25 °C, pH + pOH = 14.00, and pure water has [H₃O⁺] = [OH⁻] = 1.0 × 10⁻⁷ M (pH 7).
- pH below 7 is acidic, 7 is neutral and above 7 is basic.
- Each pH unit is a tenfold change in [H₃O⁺], so a lower pH means more H₃O⁺.
Example
(1) What is the pH if [H₃O⁺] = 1.0 × 10⁻³ M? (2) What is the pH if [OH⁻] = 1.0 × 10⁻⁵ M? (3) How many times more H₃O⁺ is in a solution of pH 2 than one of pH 6?
Solution
(1) pH = −log(1.0 × 10⁻³) = 3.00, acidic. (2) pOH = 5.00, so pH = 14.00 − 5.00 = 9.00, basic. (3) The difference is 4 units, so 10⁴ = 10,000 times more.
Buffers
- A buffer holds pH nearly steady when small amounts of acid or base are added.
- A buffer needs a weak acid together with its conjugate base (or a weak base with its conjugate acid) in appreciable amounts, such as acetic acid with sodium acetate.
- The weak acid neutralizes added OH⁻, and the conjugate base neutralizes added H₃O⁺.
- Blood is buffered mainly by carbonic acid and bicarbonate and is kept near pH 7.4.
- A strong acid with its salt (HCl and NaCl), a strong acid with a strong base, or two neutral salts cannot buffer, because no weak acid-base pair is present.
Radioactive decay
- Alpha decay emits a helium-4 nucleus (2 protons, 2 neutrons): mass number drops by 4 and atomic number by 2.
- Beta decay emits an electron as a neutron turns into a proton: mass number is unchanged and atomic number rises by 1.
- Gamma rays are high-energy electromagnetic radiation: neither number changes.
- Alpha particles are stopped by paper or the outer skin, beta particles by a sheet of aluminum a few millimeters thick, and gamma rays need thick lead or concrete.
- Alpha emitters are most harmful when inhaled or swallowed.
Example
(1) Uranium-238 (Z = 92) undergoes alpha decay. What forms? (2) Thorium-234 (Z = 90) undergoes beta decay. What forms?
Solution
(1) Mass 238 − 4 = 234; atomic number 92 − 2 = 90, which is thorium: thorium-234. (2) Mass stays 234; atomic number 90 + 1 = 91, which is protactinium: protactinium-234.
Half-life, fission and fusion
- One half-life is the time it takes half of the radioactive atoms in a sample to decay; after n half-lives, (1/2)ⁿ of the sample remains.
- Count halvings step by step rather than dividing the starting amount by the final amount.
- Fission splits a heavy nucleus such as uranium-235 into smaller nuclei and powers nuclear reactors.
- Fusion joins very light nuclei, such as hydrogen into helium, needs extremely high temperatures and powers the Sun and other stars.
- In both, a tiny loss of mass releases an enormous amount of energy.
Example
A radioactive tracer has a half-life of 6 hours. (1) How much of an 80 mg dose remains after 24 hours? (2) How long until 10 mg remains?
Solution
(1) 24 h ÷ 6 h = 4 half-lives: 80 → 40 → 20 → 10 → 5 mg. (2) 80 → 40 → 20 → 10 mg is 3 half-lives, so 3 × 6 h = 18 hours.
Key terms
- Solvent
- The part of a solution present in the largest amount, such as water in saline.
- Solute
- Substance dissolved in a solution in the smaller amount, such as NaCl in saline.
- Electrolyte
- A substance that breaks into ions in water, letting the solution carry an electric current.
- Molarity (M)
- Moles of solute ÷ liters of solution.
- Dilution equation
- C₁V₁ = C₂V₂; solute moles stay constant when solvent is added.
- Mass-volume percent (m/v)
- Grams of solute per 100 mL of solution.
- pH
- −log[H₃O⁺]; below 7 is acidic, above 7 is basic.
- pH + pOH
- Equals 14.00 at 25 °C.
- Strong acid
- Ionizes completely in water: HCl, HBr, HI, HNO₃, H₂SO₄, HClO₄.
- Neutralization
- Acid + base → salt + water.
- Buffer
- A weak acid with its conjugate base (or a weak base with its conjugate acid) that keeps pH nearly steady.
- Carboxylic acid
- Organic compound with a –COOH group, such as acetic acid, the acid in vinegar.
- Alpha particle
- Helium-4 nucleus; its emission lowers mass number by 4 and atomic number by 2.
- Beta particle
- Electron from a neutron changing to a proton; atomic number rises by 1.
- Gamma ray
- High-energy electromagnetic radiation; very penetrating, shielded by thick lead or concrete.
- Half-life
- Time for 50% of a radioactive sample to decay.
- Fission
- Splitting of a heavy nucleus into smaller ones, as in nuclear reactors.
- Fusion
- Joining of light nuclei, such as hydrogen into helium; powers the Sun.
Common mistakes
- Molarity uses liters of solution: divide by 0.750 L, not 750 mL, and convert grams to moles first.
- In C₁V₁ = C₂V₂, a more concentrated stock needs a smaller volume; the answer is the stock volume, not the water added.
- pH + pOH = 14, so subtract (do not add) and remember that a pOH is not a pH. Each pH unit is a factor of 10, so a 3-unit difference is 1,000 times, not 3 times.
- Only a weak acid with its conjugate base forms a buffer; HCl with NaCl or HCl with NaOH does not. Acetic acid and HF are weak acids, while HCl, HNO₃ and H₂SO₄ are strong.
- Alpha decay lowers mass number by 4 and atomic number by 2; beta decay raises atomic number by 1 and leaves mass number alone. Paper stops alpha, not gamma.
- Count half-lives by halving (200 → 100 → 50 → 25 is 3 half-lives), not by dividing start by finish. The Sun runs on fusion, and gases become less soluble, not more, as water warms.
Checked against: Wikipedia, "Solution (chemistry)"; Wikipedia, "Saline (medicine)"; Wikipedia, "Electrolyte"; Wikipedia, "Strong electrolyte"; Wikipedia, "Ethanol"; Wikipedia, "Henry's law"; Wikipedia, "Molar concentration"; Wikipedia, "Molar mass"; Wikipedia, "Dilution (equation)"; Wikipedia, "Brønsted–Lowry acid–base theory"; Wikipedia, "Acid strength"; Wikipedia, "Base (chemistry)"; Wikipedia, "Neutralization (chemistry)"; Wikipedia, "Carboxylic acid"; Wikipedia, "Functional group"; Wikipedia, "pH"; Wikipedia, "Buffer solution"; Wikipedia, "Alpha decay"; Wikipedia, "Beta decay"; Wikipedia, "Gamma ray"; Wikipedia, "Gamma decay"; Wikipedia, "Ionizing radiation"; Wikipedia, "Half-life"; Wikipedia, "Nuclear fission"; Wikipedia, "Nuclear fusion"